YT200 Air Filter Regulator

Description

Air Filter Regulator, YT-200 (YT-205), receives main air pressure and supplies to the desirable level to a positioner or other devices.

Product Characteristic

●Maintain desirable pressure level, regardless of fluctuation of pressure input.
●Aluminum body increases versatility of the product in different environments.
●5 micron filter sorts minuteness particles in the air.
●Relief function is available which discharges to atmosphere if the outlet pressure is higher than setting pressure.

Installion Caution

When installing the product,please follow below procedures.
●Always wear safety equipments and follow safety procedures.
●Air must be clean and dry.
●Please operate within the range of specified capacity of the regulator in the manual.lf exceeded， the product can be damaged and may result serious damages and accident.
●The product can be malfunctioned if any damages applied. Please treat the unit with appropriate care.
●For maintenance，release drain bolt on timely basis to extract any water inside.
●Filter must be replaced on timely basis. Filter usage depends on the environment/field.
●After pressure is set,please make sure adjust bolt is completely fastened.

Specification

Parts and Assembly

Please be knowledgeable of product's major parts and assembly steps for future maintenance.

Opeartion Logic

Air pressure is being supplied to output port by turning adjust bolt clockwise which will push diaphragm, then disconnects from stem and disc.The set pressure level stays by transferring pressure to lower diaphragm, which results to balance adjust spring. In case of higher pressure than setting, the pressure pushes diaphragm and pressure is released through the hole on spring case.

Pipe Connection

YT-200 is used for constant supply pressure to positioner, actuator, solenoid valves, or etc. It can be installed without a bracket , which can be installed on through the pipeline. Before connecting with pipeline,please make sure pipeline is emptied, and the size of the pipeline is appropriate for required capacity.

If YT-200 must be installed on the bracket, please make a bracket according to the product's dimension.