Manual Instruction of ITS300 Position Monitoring Switch
Hearken Flow ITS position monitoring switch is used for the valve and actua...
This is a right-angle rotating gear driver, using aluminum alloy precision die-casting shell, suitable for the cock of ball valve and butterfly valve, it is driven by worm gear and has self-locking function, and adopts tapered roller bearing to make The operation of the gearbox is more convenient and efficient.
This is a right-angle rotating gear driver, using aluminum alloy precision die-casting shell, suitable for the cock of ball valve and butterfly valve, it is driven by worm gear and has self-locking function, and adopts tapered roller bearing to make The operation of the gearbox is more convenient and efficient. The stem nut can be made into a solid or separate structure according to customer requirements, and the mounting flange adopts the ISO5211 international standard, so it can be more easily installed with the valve. The overall protection level can reach IP67, and for some special environments, it canalso be made into IP68 level.
NO. | Item | Material |
1 | Bolt | SS304 |
2 | Pointer | ABS resin |
3 | Cover | Aluminium |
4 | O-Ring | NBR70 |
5 | Pin | Steel black |
6 | Wom gear | Ductile iron |
7 | Rear seal | NBR 70 |
8 | Body | Aluminium |
9 | Adjusting bolt | Steel black |
10 | Adjusting bolt gasket | SS304 |
11 | Adjusting nut | SS304 |
12 | Adjusting nut sheath | NBR 70 |
13 | Bearing | Powder metallurgy |
14 | Worm | Carbon steel 45# |
15 | Front seal | NBR70 |
16 | Rotating shaft | SS304 |
17 | Hand wheel | Carbon steel polyster coating |
18 | Pin | Steel black |
Model | HAM1(19070) | HAM2(19092) | HAM3(19102) | HAM4(19125) | HAM5(19140) | |
Technical-parameters | ||||||
Ratio | 40:01:00 | 37:01:00 | 36:01:00 | 36:01:00 | 50:01:00 | |
Oitput torque(N.m) | 180 | 300 | 540 | 675 | 1500 | |
Stemdia,d(mm) | 30 | 32 | 43 | 43 | 54 | |
Mid-B-vaive(EPDM)DN | DN32-100 | DN100-200 | DN200-250 | DN250-350 | DN350-400 | |
D-eccentric-B-valve(EPDM)DN | ||||||
Weight(Kg) | 1.2 | 2 | 2.8 | 4.8 | 11 | |
Connection-size | ||||||
Flange dia-D(mm) | 80 | 100 | 120 | 142 | 175 | |
PCD | D1(ISO5211) | 50/70 | 70/90 | 70/102 | 102/125 | 102/125/140 |
4-M6X10/4-M8X12 | 4-M8X12/4-M10X12 | 4-M8X10/4-M10X15 | 4-M8X10/4-M12X18 | 4-M8X10/4-M16X24 | ||
S | 8/9/11/14/17 | 9/1l/14/17 | 17/19/22 | 19/22/24 | 22/24/27 | |
2-b | -- | -- | -- | -- | -- | |
R(deep) | -- | -- | -- | -- | -- | |
Appearance-size | ||||||
L | 115 | 130 | 150 | 180 | 220 | |
L1 | 50 | 58 | 65 | 80 | 95 | |
L2 | 42 | 50 | 60 | 60 | 78 | |
H | 48 | 58 | 58 | 74 | 84 | |
H1 | 19 | 18 | 18 | 21 | 51 | |
Handwheel | d1 | 20 | 20 | 20 | 20 | 25 |
L3 | 160 | 160 | 215 | 225 | 325 | |
W | 140 | 200 | 250 | 300 | 400 |
2024
/
Hearken Flow ITS position monitoring switch is used for the valve and actua...
2024
/
This article introduces the differences between solenoid valves and electri...
2024
/
Rotork: Rotork is a global leader in the design and manufacture of industri...
2023
/
Ecwatech exhibition is the leading water and wastewater technology fair in ...
GET A QUOTE