What is the Four common failures of control valves that caused analysis and solutions?
(1) The regulating valve does not operate Reasons: There is no signal pr...
1. The cylinder conforms to the ISO15552 standard cylinder.
2. The shaft seal material is made of PU material, which has the characteristics of high strength, good toughness, wear resistance, oil resistance, and aging resistance.
3. The front and rear end covers of the cylinder have a buffer adjustment function, which makes the cylinder piston run smoothly at both ends without impact.
Bore size (mm) | 32 | 40 | 50 | 63 | 80 | 100 | 125 | 160 | 200 |
Fluid | Air | ||||||||
Action | Double acting, Single/Double rod | ||||||||
Minimum operating pressure | 0.1 MPa | ||||||||
Maximum operating pressure | 1.0 MPa | ||||||||
Proof pressure | 1.5 MPa | ||||||||
Ambient and fluid temperature | -20 to 80°C (No freezing) | ||||||||
Cushion | Adjustable air cushion at both ends | ||||||||
Lubrication | Non-lube | ||||||||
Piston rod dia. | 12 mm | 16 mm | 20 mm | 25 mm | 32 mm | 40 mm | 40 mm | ||
Piston rod thread | M10x1.25 | M12x1.25 | M16x1.5 | M20x1.5 | M27x2.0 | M36x2.0 | |||
Port size | 1/8 | 1/4 | 3/8 | 1/2 | 3/4 |
Bore/Symbol | A | A1 | A2 | B | C | D | E | F | G | H | I | J | K | L |
32 |
142 |
190 |
187 |
48 |
94 |
30 |
28 |
16 |
27.5 |
22 |
17 |
6 |
M10x1.25 |
M6 |
40 |
159 |
213 |
207 |
54 |
105 |
35 |
32 |
18 |
29 |
24 |
19 |
7 |
M12x125 |
M6 |
50 |
175 |
244 |
233 |
69 |
105 |
40 |
42 |
25 |
30 |
32 |
24 |
8 |
M16x1.5 |
M8 |
63 |
190 |
259 |
250 |
69 |
120 |
40 |
40 |
24 |
31.5 |
32 |
24 |
8 |
M16x1.5 |
M8 |
80 |
214 |
300 |
286 |
86 |
128 |
40 |
53 |
30 |
35.5 |
40 |
30 |
10 |
M20x1.5 |
M10 |
100 |
229 |
320 |
308 |
91 |
138 |
45 |
55 |
32 |
36 |
40 |
30 |
10 |
M20x1.5 |
M10 |
125 |
279 |
398 |
372.5 |
119 |
160 |
60 |
74 |
45 |
46 |
54 |
41 |
13.5 |
M27x2 |
M12 |
160 | 332 | 484 | 448 | 152 | 180 | 65 | 94 | 58 | 50 | 72 | 55 | 18 | M36x2 | M16 |
200 | 337 | 514 | 472 | 157 | 180 | 75 | 100 | 57 | 50 | 72 | 55 | 18 | M36x2 | M16 |
Bore/Stymbol | N | O | P | Q | R | S | T | V | W | Z |
32 | 13.5 | G1/8" | 4 | 7.5 | 7 | 47 | 32.5 | 12 | 10 | 21 |
40 | 16 | G1/4" | 6 | 8.5 | 9 | 53 | 38 | 16 | 13 | 21 |
50 | 15.5 | G1/4" | 8.5 | 7.5 | 7.5 | 65 | 46.5 | 20 | 17 | 23 |
63 | 16.5 | G3/8" | 7.5 | 8.5 | 9 | 75 | 56.5 | 20 | 17 | 23 |
80 | 16.5 | G3/8" | 11 | 8.5 | 13.5 | 95 | 72 | 25 | 22 | 29 |
100 | 18.5 | G1/2" | 13.5 | 9.5 | 14.5 | 115 | 89 | 25 | 22 | 29 |
125 | 23 | G1/2" | 14 | 12 | 14 | 140 | 110 | 32 | 28 | 35 |
160 | 25 | G3/4" | 15 | 12 | 20 | 180 | 140 | 40 | 36 | 40 |
200 | 25 | G3/4" | 15 | 12 | 20 | 220 | 175 | 40 | 36 | 40 |
2024
/
(1) The regulating valve does not operate Reasons: There is no signal pr...
2024
/
1. Indicator light failure1.Fault phenomenon:After powering on the electric...
2024
/
Hearken Flow ITS position monitoring switch is used for the valve and actua...
2024
/
This article introduces the differences between solenoid valves and electri...
GET A QUOTE